Peugeot405
1. The maintenance instruction
2. Maintenance service
3. Engines
4. Fuel system
4.1. Fuel system with the carburettor
4.2. One-dot systems of injection of fuel
4.3. Multidot systems of injection of fuel
4.3.1. The air filter
4.3.2. An accelerator cable
4.3.3. Systems of injection of fuel
4.3.4. Check and adjustment of systems of injection of fuel
4.3.5. The case throttle
заслонки
4.3.6. Elements of system of injection Bosch L3. 1-Jetronic
4.3.7. Elements of system of injection Bosch LU2-Jetronic
4.3.8. Elements of system of injection Bosch Motronic
4.3.9. Elements of system of injection Magnetti Marelli
4.3.10. An inlet collector
4.3.11. System of giving of air ACAV (models with 16 valves)
5. Systems of greasing, cooling
6. Release system
7. Coupling
8. Transmissions
9. Power shafts
10. A steering
11. Suspension brackets
12. Brake system
13. A body
14. An electric equipment
4.3.1. The air filter
EARLY MODELS AND ALL MODELS WITH THE AIR FILTER LOCATED ON THE LEFT-HAND SIDE OF THE ENGINE
PERFORMANCE ORDER
1.
To remove the multicontact tip of a measuring instrument of a stream of air.
2.
To weaken
bracket
on the top pipeline of giving of air in the engine.
3.
For removal of a cover of the air filter to disconnect bottom
brackets
and a pipe to lift a cover and to remove the air filter.
LATER MODELS AND ALL MODELS WITH THE AIR FILTER LOCATED ON THE ENGINE
PERFORMANCE ORDER
1.
To weaken collars and to remove a hose of giving of air in the engine.
2.
To remove two
brackets
, then to unscrew two screws from a cover of the air filter, to uncover and the air filter.